Profiles

43F-Concealed fit window

Specification

Crimsafe Ultimate concealed fit window frame specification

Crimsafe Security Screens – Crimsafe 0.9mm diameter high-tensile 304-grade woven stainless steel security mesh, screw-clamped at 62.5mm spacings into aluminium Ultimate concealed fit window frame (43F) with clip-on clamp cover (40B) using Crimsafe Screw-Clamp™ technology, tested to withstand up to 750 Joules in a single impact and 3,000 hours in the prohesion accelerated salt spray and cyclic test: the equivalent of 30 years exposure to the elements.

Colour:

TBA

Installation:

All doors and screens are to be fitted as per AS5040 – 2003 and the Crimsafe Installation Manual, using Crimsafe 410 stainless steel tamper-resistant security head, installation screws.

Warranty:

10 years. Terms and conditions apply.

Technical information

Wire:

304 structural grade, high tensile-tuff® stainless steel, 0.9mm wire diameter, 800 + 40 Mpa.

Mesh:

Plain weave, 10 Count Mesh i.e: 10 strands on the weft x 10 strands on the warp, per square inch / 25.4mm of mesh. Woven to Standards ISO 9044/ ASTM E2016:06.

Apertures:

The Crimsafe mesh has apertures on average of 1.5mm x 1.5mm.

Open Area:

The open area of the Crimsafe woven mesh is 41.6%.

Extrusion:

Extruded aluminium alloy 6063.

Clamping System:

Crimsafe, tamper resistant, perimeter Screw-Clamp™ system, securing the mesh in the frame with security head screws, spaced every 62.5mm penetrating through the clamp, the mesh and into the screen frame.

Surface Coatings:

Powder coat application as per AS4506: 2005 Metal Finishing for thermoset powder coatings.

Testing

All Crimsafe products have been tested to and pass the requirements of AS5039 – 2008 as prescribed in AS5041 Methods of Test – Security screen doors window grilles:

  • Dynamic Impact Test
  • Jemmy Test
  • Pull Test
  • Knife Shear Test
  • Shear Test
  • Probe Test

External Testing to the relevant Industry Architectural Standards:

  • Exova Fire Attenuation Test 38703800.6
  • Azuma Cyclonic Debris Screen impact test up to 44m/s to AS/NZS 1170.2:2011
  • JCU Cyclone Testing Station Report No. TS823 – Crimsafe 35.2m/s to AS/NZS 1170.2:2011
  • Dulux & Chemetall 3000-hour Salt Spray Test
  • Balustrade Testing – AS/NZS 1170.1:2002, Table 3.3 for occupancy type C5
  • Energy Efficiency rated under the WERS program
  • CSIRO Pressure Drop / Air Flow Test
  • Solar Heat Gain Coefficient Test NFRC 201-2004
  • Shading Protocol Thermal Performance Test NFRC 102 – 2004
  • Fall prevention 2016-039-S1

Specify this

To correctly specify this product, copy and paste this text into your project specification documentation.

Crimsafe Security Screens – Crimsafe 0.9mm diameter high-tensile 304-grade woven stainless steel security mesh, screw-clamped at 62.5mm spacings into aluminium Ultimate concealed fit window frame (43F) with clip-on clamp cover (40B) using Crimsafe Screw-Clamp™ technology, tested to withstand up to 750 Joules in a single impact and 3,000 hours in the prohesion accelerated salt spray and cyclic test: the equivalent of 30 years exposure to the elements.

Copied to Clipboard