09A - Commercial Door - Crimsafe Commercial

Specification

Crimsafe Commercial door specification

Crimsafe Security Screens – Crimsafe 0.9mm diameter high-tensile 304-grade woven stainless steel security mesh, screw-clamped at 25mm staggered spacings into aluminium Commercial security door frame (09A) using Crimsafe Screw-Clamp™ technology, tested to withstand up to 1200 Joules in a single impact and 3,000 hours in the prohesion accelerated salt spray and cyclic test: the equivalent of 30 years exposure to the elements.

Crimsafe recommend Commercial, Ultimate and Heavy Duty only for Commercial applications.

Colour:

TBA

Installation:

All Crimsafe doors and screens to be fitted as per AS5040 – 2003 and the Manufacturers Installation Manual, using Crimsafe patented 410 stainless-steel security head, tamper resistant installation screws with a spacing of 50mm from the corners and then no more than 150mm spacings.

Warranty:

10 years. Terms and conditions apply.

Technical information

Wire:

304 structural grade, high tensile-tuff® stainless steel, 0.9mm wire diameter, 800 + 40 Mpa.

Mesh:

Plain weave, 10 Count Mesh i.e: 10 strands on the weft x 10 strands on the warp, per square inch / 25.4mm of mesh. Woven to Standards ISO 9044/ ASTM E2016:06.

Apertures:

The Crimsafe mesh has apertures on average of 1.5mm x 1.5mm.

Open Area:

The open area of the Crimsafe woven mesh is 41.6%.

Extrusion:

Extruded aluminium alloy 6063.

Clamping System:

Crimsafe patented, tamper resistant, perimeter Screw-Clamp™ system, securing the mesh in the frame with patented 410 stainless security head screws, spaced every 25mm staggered penetrating through the clamp, the mesh and into the screen frame.

Surface Coatings:

Powder coat application as per AS4506: 2005 Metal Finishing for thermoset powder coatings.

Testing

All Crimsafe products have been tested to and pass the requirements of AS5039 – 2008 as prescribed in AS5041 Methods of Test – Security screen doors window grilles:

Dynamic Impact Test
Jemmy Test
Pull Test
Knife Shear Test
Shear Test
Probe Test

External Testing to the relevant Industry Architectural Standards:

Exova Fire Attenuation Test 38703800.6
Azuma Cyclonic Debris Screen impact test up to 44m/s to AS/NZS 1170.2:2011
JCU Cyclone Testing Station Report No. TS823 – Crimsafe 35.2m/s to AS/NZS 1170.2:2011
Dulux & Chemetall 3000-hour Salt Spray Test
Balustrade Testing – AS/NZS 1170.1:2002, Table 3.3 for occupancy type C5
Energy Efficiency rated under the WERS program
CSIRO Pressure Drop / Air Flow Test
Solar Heat Gain Coefficient Test NFRC 201-2004
Shading Protocol Thermal Performance Test NFRC 102 – 2004
Fall prevention 2016-039-S1

Specify this

To correctly specify this product, copy and paste this text into your project specification documentation.

Crimsafe Security Screens – Crimsafe 0.9mm diameter high-tensile 304-grade woven stainless steel security mesh, screw-clamped at 25mm staggered spacings into aluminium Commercial security door frame (09A) using Crimsafe Screw-Clamp™ technology, tested to withstand up to 1200 Joules in a single impact and 3,000 hours in the prohesion accelerated salt spray and cyclic test: the equivalent of 30 years exposure to the elements.

Crimsafe recommend Commercial, Ultimate and Heavy Duty only for Commercial applications.

Copied to Clipboard

Profiles